Matjack

Home

Jumbosafelift

Catalogs & Accessories

New Products

	QUICK LIFT BAG The quick Lift has been developed to solve those lifting problems where a hydraulic jack cannot be used. Made from Hypalon tm/Neoprene tm coated polyester fabric and designed to work at a maximum pressure of 8 psi. The Quick Lift will have a vertical lift capacity of 1.5 tons and a lift and roll capacity of 3 tons.

The Quick Lift can be inflated with either the recommended dual action hand pump or regulated airline with a gauge into the system. When packed away, the Quick Lift is a compact 18” x 18” x 24 ” and including the pump weighs 13 lbs. Its lightweight construction means that it can easily be carried and it will cope with most surfaces and vehicle types. The low pressure of operation means damage free lifting and the Quick Lift utilizes an environmentally friendly inflation system. The Quick Lift, pump, carry bag, inflation hose, and optimal push button control can be purchased separately.
1. Unroll the Quick Lift cushion and uncoil the hose. Push the bag under the vehicle and loosen the lug nuts. If the ground is uneven or rocky, place some protection over the bag. This applies if the car has sharp edges.
	2. Pump up the Quick Lift, making sure the hose is not caught between the car and the cushion.
3. When vehicle wheels have left the ground, close the valve and disconnect the pump. Control lowering the vehicle using the valve.

Home | High Pressure Airbags | Low Pressure Airbags | Quick Lift Bags
Hose-Cat Coupling Assist Tool | MatSack Leak Sealing System | Portable Roadways
Industrial Plugs | Dunnage Bags | Underwater Lift Bags | Digital Water Levels

MatJack is a division of Indianapolis Industrial Products, Inc.
1441 Sadlier Circle, West Drive Indianapolis, Indiana 46239 317.359.3078 FAX 317.359.3079
matjack@sprynet.com Or Call 1-800-827-3755 for more information